Operating Voltage: 90 - 240 v AC, 50 / 60Hz. Light Source Type: LED + laser.
LED Source: 4 in 1, (RGBw 2W) LED + Gobo Wheels (RGBW 3) + laser (R200mw + G40mw) + strobe 40w. Light Color: RGBW 4 in 1 red, green , blue and white (mixed or separate mode). Control Mode: DMX, master and slave, sound, auto mode.
Speciality: high-speed electronic flash / random strobe, 1-25 times / sec. Operating Temperature: -25 degrees to +35 degrees.
This magic LED stage light includes promise sword, pattern Light, laser Light and strobe, and each lamp bead can be individually controlled, programmed into personal desired lighting effects as well as its multifunctional performance. Safety Capacity: Sound active mode with the function of shut-off if there is no music. Master/Slave mode (over ten slave units) and DMX512 mode will shut off laser automatically without trigger signal. It is designed according to the security and good performance, which will be safer to human and environment. Applicable place: DJs, Bands, Bars, Pubs, Clubs, Roller skating rinks, KTV, family party, etc.Various working modes Includes four working modes as DMX, Sound Active, AUTO and Master-Slave Control for different applications. DMX control The unit has 7 channels functions to control system mode, laser beam running direction, running speed, twinkle speed and color setting in DMX mode. The unit has BLACK OUT function. The unit will shut OFF if no DMX512 signal. Master-Slave function The system allow link many units (as slave unit) together to doing synchro job without console in sound active or AUTO mode. LED indicating and shut-off function In sound active mode, the unit's panel has LED indicating for sound active. The unit will shut off after 8 seconds when the music stops. DPSS Laser Use Diode-Pumped Solid State laser, stable output and long working life.
The shell of this product made of high quality galvanized aluminum, can be waterproof (the whole machine isn't waterproof, can't be used outside in rainy day), rust and anti-static, hanging bar can be wide angle adjustment, no caltrop and scrub on the surface, very smooth. This video and display pictures made of heavy bass environment in the dark with smoke. Initial testing of laser lights, be sure to be in the horizontal plane. Please use the appropriate voltage, preferably national standard voltage test lamp, uncorrect use of the machine power supply voltage may be destroyed. Please Do not look directly at the laser beam for a long time at close range, the laser irradiation does not harm the body but eyes.More information, please refer to the instructions. Laser light System × 1. DJs, Bands, Bars, Pubs, Clubs, Roller skating rinks, KTV, Family party, Birthday, celebration, Wedding, Festival, Mall, Store, Shop and other appointed place. The video and pictures were made under the dark environment with foggy effects. The actual effects is much better than the video you seen as the resolution of video may appear to be dusky. The item will be shortened it's life if it's keeping run for a long time, you are suggested to switch off for 15 mins when it was running for 6 hours. Keep away from children and NO direct eye contact to the laser lights. Please comply with the user manual during using. It's normal for a little sound when the item is running as it was made with a stepping motor. These charges are buyers responsibility. We will do the same for you. Thank you for your kind attention. The item "Laser Strobe Pattern Magic Ball 4 in 1 Led Light Stage Party Dj Disco Wedding" is in sale since Monday, November 27, 2017. This item is in the category "Musical Instruments & Gear\Stage Lighting & Effects\Stage Lighting\ Single Units".stagelighting" and is located in . This item can be shipped to North, South, or Latin America, all countries in Europe, all countries in continental Asia, Australia.